Yashas Enterprises

DESCRIPTION Mapei Planicrete Acrylic is a one-component, concentrated liquid acrylic polymer used to enhance the performance of cementitious slurries repair mortars, plasters, stuccos concrete mixes and toppings for the restoration of horizontal, vertical and overhead concrete; concrete masonry units (CMU); and masonry surfaces. Some application examples • Prepackaged for easy field use and control. • Optimizes bond to existing concrete substrates. • Improves resistance to abrasion and freeze/thaw cycles. • Non re emulsifiable • Suitable for exterior applications

Additional Information:

• Item Code: 377501
• Production Capacity: Bottle
• Packaging Details: WP-SBR(Acrylic)

Mapeplast Super is an integral waterproofing and plasticizing admixture for concrete and mortar. Ready-mix concrete for watertight structures (with a water/cement ratio not higher than 0.55), purification plants, reservoirs, canals, tunnels, etc;PACKAGING Mapeplast Super is available in 5 kg - 2O KG DRUM

Additional Information:

• Item Code: 870520
• Production Capacity: WP-Integral
• Packaging Details: Mapeplast Super is available in 5 kg - 2O KG DRUM

code-100,110,111,112,113,114,120,130,131,132,142,143,144,(1 set=6*1 kg)

Kerapoxy [NA] is a premium-grade, water-cleanable, 100%-solids, high-strength, chemical-resistant, nonsagging, epoxy grout and mortar that offers excellent stain and chemical resistance. This versatile product is ideal for a wide range of projects, from countertops to shopping malls to airport terminals. 

• Stain-free*
• No sealer required
• Water-cleanable

* With immediate cleaning and proper maintenance, Kerapoxy stain-free grout is resistant to staining when exposed to most common household goods and cleaning agents. Long-term exposure to any material can increase the potential for staining grout

Additional Information:

• Production Capacity: 10 to 30 Degree C
• Packaging Details: Bucket

 Monolithic sealing of cracks.▪ Bonding steel plates to concrete (béton plaqué) by low pressure injection.Some application examples▪ Structural repair of beams, pillars and cracked oors by low pressure injection.▪ Reinforcement of beams and oors by injection with the béton plaqué method, when the plates to bebonded are tted with lateral aps and it is therefore impossible to apply Adesilex PG1 or Adesilex PG2 SP.▪ Repair of architectural concrete, wall coverings and architectural elements that are crumbly.▪ Structural consolidation and restoration of civil and industrial road constructions and underground worksthat show signs of microcracking.▪ Sealing of cracks in cementitious screeds.▪ Restoration, by injection, of concrete structures damaged by earthquakes, settlements or impacts.

Additional Information:

• Item Code: 1578304
• Production Capacity: 24 MONTH
• Packaging Details: 4 kg kits (component A : 3.08 kg - component B: 0.92 kg). 2 kg kit (component A : 1.54 kg - component B:0.46 kg)

Multi-purpose bonding promoter primer for render, smoothing compounds and cementitious adhesives, for indoor and outdoor use. Ideal for laying tiles on top of existing tiles.

Eco Prim Grip Plus is a multi-purpose adhesion promoter primer for renders, smoothing compounds and cementitious adhesives.

Suitable for indoor and outdoor applications, on walls and floors, it is used to improve the adhesion of skim coats, cementitious adhesives and renders, even on smooth and low-absorbent substrates. It is ideal for laying tiles over existing tiles.

Odourless and solvent-free, it has very low emissions of volatile organic compounds (VOC).

• Ideal for laying tiles on top of existing tiles
• Specific for smooth substrates with low absorbency
• For indoor and outdoor use
• Almost no odour and solvent-free
• Ready to use
• No health risks
• With very low emission of volatile organic compounds (VOC)

Additional Information:

• Item Code: 1560105
• Production Capacity: Bucket

• Higieniza superficies de piedra, enlucidos (incluso pintados), cemento, terracota, juntas, cerámica, vidrio, clinker.
• Elimina rápidamente el moho
• Aplicación rápida y sencilla

Additional Information:

• Production Capacity: 12 MONTH
• Packaging Details: UltraCare Mould Remover is supplied in 0.75 l spray bottles

• Quick and simple application
• Ready to use, available in spray bottle
• Contact time (15-20 minutes)
• High performance
• Ideal for cleaning at point of installation
• Suitable for porcelain, ceramics and glass mosaics
• Quick and easy application

Additional Information:

• Production Capacity: 24 Month
• Packaging Details: 0.75 lit Bottle

Especially fine non-slip cementitious adhesive for absorbent ceramic tiles
WHERE TO USEFor interior fixing of ceramic tiles and ceramic mosaics, double-fired or single-fired on floors and walls on cementitious substrates or gypsum substrates (for the latter with prior application of a suitable primer).
CONSUMPTONFixing of ceramic mosaics– Small formats in general (trowel No. 4): about 2 kg/m2– Normal size tiles (trowel No. 5): 2.5-3 kg/m2– Tiles with rough back-profile or on irregular substrate (trowel No. 10) about 6 kg/m2

Additional Information:

• Production Capacity: Small formats in general (trowel No. 4): about 2 kg/m2
• Packaging Details: Mapeset is supplied in white and grey colours packed in 25 kg paper bag

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC).
TECHNICAL DATA:
Consistency: liquid.
Colour: blue.
Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate.
Drying time: 2 hours according to the dilution rate and the absorption of the substrate

Additional Information:

• Item Code: 20105
• Production Capacity: 12 months. Protect from frost.
• Packaging Details: 5, 10 and 25 kg drums and 12x1 kg boxes.

Mapeset IN is a normal (1)Mapeset IN is a grey powder composed of cement, sands of selected granulometry, synthetic resins and special additives according to a formula developed in MAPEI's Research and Development Laboratories. Mapeset IN, mixed with water, becomes an easily workable mortar, that can be applied even vertically without slumping and without letting the tiles slip. Mapeset IN hardens without appreciable shrinkage attaining a good resistance, adhering perfectly to all materials normally used in the building industry. cementitious (C) adhesive of class C1. 

Additional Information:

• Production Capacity: Normal size tiles (trowel No. 5): 2.5-3 kg/m2
• Packaging Details: Mapeset is supplied in white and grey colours packed in 25 kg paper bags.

Especially fine non-slip cementitious adhesive for absorbent ceramic tiles
WHERE TO USEFor interior fixing of ceramic tiles and ceramic mosaics, double-fired or single-fired on floors and walls on cementitious substrates or gypsum substrates (for the latter with prior application of a suitable primer).
CONSUMPTONFixing of ceramic mosaics– Small formats in general (trowel No. 4): about 2 kg/m2– Normal size tiles (trowel No. 5): 2.5-3 kg/m2– Tiles with rough back-profile or on irregular substrate (trowel No. 10) about 6 kg/m2

Additional Information:

• Item Code: 1291240
• Production Capacity: Small formats in general (trowel No. 4): about 2 kg/m2
• Packaging Details: Mapeset is supplied in white and grey colours packed in 25 kg paper bags.

• High performance
• High yield
• For interior and exterior floor and wall
• Ready to use
• Does not alter appearance, colour or shine of the surface and does not create a film over it
• Dries quickly
• The product grants durable stain protection. The treatment can be repeated over time
• Has excellent UV stability and retains good protective capacities even after multiple washings

Additional Information:

• Production Capacity: 24 Month
• Packaging Details: 0.75 LIT BOTTLE

One-component cementitious levelling mortar for building up slopes on roofs over new and old waterproof sheaths.
TECHNICAL DATA:
Consistency: powder.
Colour of mix: light grey.
Applicable thickness (cm): up to 5.
Mixing ratio: 4.5-5.0 litres per bag.
Consumption (kg/m² per cm): 16.

Additional Information:

• Item Code: 2659325
• Production Capacity: 35 Degree Celsius
• Packaging Details: 25 kg bags.

Fluid expansive mortar for anchoring objects in place.

TECHNICAL DATA:
Maximum dimension of aggregate: 2.5 mm.
Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water.
Pot life of mix: approximately 1 hour (at +20°C).
Maximum applicable thickness: 6 cm per layer.
Classification: EN 1504-6.

Additional Information:

• Item Code: 1503425
• Production Capacity: 12 months.
• Packaging Details: Application: pouring. Consumption: 1.95 kg/dm³ of cavities to be filled. Packaging: 25 kg bags.

Expansive, super-fluid cementitious binder for mixing injection slurry, mortar and concrete.
TECHNICAL DATA:
Mixing ratio:
– injection slurry: 100 parts of STABILCEM with 32 parts of water;
– mortar, beton and concrete: according to the consistency and performance required from the aggregate.

Additional Information:

• Item Code: 151120
• Production Capacity: 12 months.
• Packaging Details: Application: injection and pouring into formwork. Consumption: – injection slurry: 1.6 kg/l of cavities to be filled; – mortar and beton: 350-550 kg/m³; – concrete: 400 kg/m³. Packaging: 20 kg vacuum-packed polyethylene bags.

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement.
TECHNICAL DATA:
Sizes available:
– 17 cm (MAPEBAND TPE 170);
– 32.5 cm (MAPEBAND TPE 325).
Width of expanding zone:
– MAPEBAND TPE 170: 50 mm;
– MAPEBAND TPE 325: 165 mm.
Thickness: 1.2 mm.
Maximum elongation of expanding zone:
–  5 mm (MAPEBAND TPE 170);
– 10 mm (MAPEBAND TPE 325).

Additional Information:

• Item Code: 795130
• Production Capacity: 30(L) X 17(W) Cm
• Packaging Details: Packaging: – 30 m rolls (both 170 and 325 width versions); – special cross and T pieces (both 170 and 325 width versions) Packaging – Mapeband TPE 170: 30 m x 17 cm rolls; – Mapeband TPE 325: 30 m x 32.5 cm rolls. .

Mapetex Sel is a non-woven fabric, macro-holed to enhance the bond between the rst and second layer of the exible,waterproof membrane in which it is embedded.Mapetex Sel is made up of continuous, synthetic, polypropylene bres joined together with a mechanical needle-punchprocedure. It is particularly recommended for strengthening Mapelastic Turbo and Mapelastic Smart.Thanks to its special properties, the characteristics of Mapelastic Turbo and Mapelastic Smart such as toughness, punch-resistance, ultimate elongation and crack-bridging, are further improved.ADVANTAGES· Remains unaltered and is resistant to alkalis contained in cement.· Resistant to atmospheric agents.· Dimensionally stable.· Light and easy to handle.· Easy to cut.· May be adapted to the prole of all types of substrate

Additional Information:

• Item Code: 2816325
• Production Capacity: Store in a dry, covered area.
• Packaging Details: Mapetex Sel is available in 25 m long rolls with a width of 1 m.

Pre-blended hi-flow expansive mortar for anchoring and repairing reinforced concrete

MAPEFILL ZERO is a pre-blended hi-flow expansive mortar for anchoring and repairing reinforced concrete, suitable for precision anchoring of machinery or metal structures and for restoring degraded structures that require the use of hi-flow mortars.

Thanks to its special formulation, this shrinkage-compensated, fibre-reinforced mortar has excellent fatigue resistance, excellent resistance to cracking and increased durability of the elements restored.

• Hi-flow
• Excellent adhesion
• Excellent resistance to mechanical stress, including dynamic stresses
• Excellent tear strength
• Very low emission of VOC
• Flowable

*MAPEFILL ZERO is part of the CO₂ Fully Offset in the Entire Life Cycle line of products. CO₂ emissions measured throughout the life cycle of products from the Zero line in 2025 using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of forestry protection projects. A commitment to the planet, to people and to biodiversity.                                

Additional Information:

• Item Code: 1504325
• Production Capacity: 12 months.
• Packaging Details: Application: pouring. Consumption: 1.95 kg/dm³ of cavities to be filled. Packaging: 25 kg bags.

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures.

Additional Information:

• Item Code: 937005
• Production Capacity: Storage: 12 months.
• Packaging Details: Consistency: powder. Pot life of mix: approx. 1 h. Classification: EN 1504-2. Consumption: 1.5 kg/m² per mm of thickness. Packaging: 25 kg bags.

Two-component,solvent-free, high performance polyurethane adhesive with very low emission level of volatile organic compounds (VOC) for ceramic and stone tiles            

Additional Information:

• Production Capacity: 24 month
• Packaging Details: 10 kg per bag

DESCRIPTIONMapeplast Super is an integral waterproong and plasticizing admixture for concrete and mortar.WHERE TO USEMapeplast Super is recommended for concrete with medium compressive strength (R 20-30 MPa).Mapeplast Super is especially recommended for applications that require a retarded rate of cement hydration at earlyages.Its principal uses are for:• protective screeds of cement, sand mortar used in waterproong;• internal and external plaster of buildings for waterproong;• the production of dense concrete;• ready-mix concrete (especially in hot weather);• pumped concrete;• mass concrete.

Additional Information:

• Item Code: 870501
• Production Capacity: WP-Integral
• Packaging Details: Mapeplast Super is available in 5 kg - 2O KG DRUM

Paintable acrylic sealant for movements up to 12.5% with a smooth effect.
TECHNICAL DATA:
Movement in service: 12.5%.
Modulus of elasticity at 50% elongation: 0.20 N/mm².
Shore A hardness: 10.
Workability time: 10 minutes.
Colours: white and grey.

Additional Information:

• Production Capacity: extrusion gun, trowel, pneumatic pump.
• Packaging Details: Consumption: 3.1 linear metres per 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridges and 550 ml soft-cartridges.

Two-component cementitious mortar for waterproofing structures below ground level and storage tanks.
TECHNICAL DATA:
Consistency: fluid; applicable by brush.
Mixing ratio: comp. A : comp. B = 4 : 1.
Pot life of mix: approx. 1 h (at +20°C).
Application temperature: +5°C to +35°C.
Minimum applicable thickness: 2 mm in 2 coats.
Classification: EN 1504-2 - coating (C) principles MC and IR.

Additional Information:

• Item Code: 782425
• Production Capacity: : comp. A 12 months,
• Packaging Details: Application: spreader, brush or roller. Consumption: approx. 1.9 kg/m² per mm of thickness. Packaging: 25 kg unit: – component A: 20 kg bag; – component B: 5 kg can.

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures.

Additional Information:

• Item Code: 937125
• Production Capacity: Storage: 12 months.
• Packaging Details: Consistency: powder. Pot life of mix: approx. 1 h. Classification: EN 1504-2.. Consumption: 1.5 kg/m² per mm of thickness. Packaging: 20 kg bags.

Two-component cementitious mortar for waterproofing structures below ground level and storage tanks.
TECHNICAL DATA:
Consistency: fluid; applicable by brush.
Mixing ratio: comp. A : comp. B = 4 : 1.
Pot life of mix: approx. 1 h (at +20°C).
Application temperature: +5°C to +35°C.
Minimum applicable thickness: 2 mm in 2 coats.
Classification: EN 1504-2 - coating (C) principles MC and IR.
Storage: comp. A 12 months, comp. B 24 months.
Application: spreader, brush or roller.
Consumption: approx. 1.9 kg/m² per mm of thickness.
Packaging: 25 kg unit:
– component A: 20 kg bag;
– component B: 5 kg can.                                 

Additional Information:

• Item Code: 937105
• Production Capacity: Storage: comp. A 12 months, comp. B 24 months.
• Packaging Details: Packaging: 25 kg unit: – component A: 20 kg bag; – component B: 5 kg can.

Two-component, high-flexibility cementitious mortar (with crack-bridging> 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools.
TECHNICAL DATA:
Consistency of mix: fluid-brushable.
Mixing ratio: comp. A: comp. B = 2 : 1.
Pot life of mix: approximately 1 hour.
Application temperature range: from +5°C to +40°C.
Minimum applicable thickness: 2 mm in 2 coats.
Classification: EN 1504-2 - coating (C) principles PI, MC and IR and EN 14891 norm.
EMICODE: EC1 Plus - very low emission.
Storage: 12 months comp. A, 24 months comp. B.
Application: brush, roller or spray.

Additional Information:

• Item Code: 168730
• Production Capacity: 24 months comp. B
• Packaging Details: – trowel or roller: 1.6 kg/m² per mm of thickness; – spray: 2.2 kg/m² per mm of thickness. Packaging: 30 kg units: 20 kg bags + 10 kg tanks.

Two-component, high-flexibility cementitious mortar (with crack-bridging> 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools.

Additional Information:

• Item Code: 167730
• Production Capacity: 12 months comp. A
• Packaging Details: – trowel or roller: 1.6 kg/m² per mm of thickness; – spray: 2.2 kg/m² per mm of thickness. Packaging: 30 kg units: 20 kg bags + 10 kg tanks.

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with extended open time (C2E/S2).
When ADESILEX P10 is mixed with ISOLASTIC (dilution rate 1:1 with water), it forms a high-performance, highly deformable adhesive with extended open time (C2E/S1).
TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC:
Pot life of mix: more than 8 hours.
Open time: 20 minutes.
Waiting time before grouting:
– on walls: 4-8 hours;
– on floors: 24-36 hours.
Set to light foot traffic: 24-36 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12004: S2 - highly deformable (ADESILEX P10 + ISOLASTIC diluted 1:1 with water - S1 deformable).
Application: KERABOND/KERABOND T/KERABOND PLUS + ISOLASTIC: N° 4, 5 or 6 notched trowel.
ADESILEX P10/SOLASTIC diluted 1:1 with water: N° 4, 5 or 6 notched trowel.

Additional Information:

• Item Code: 097108
• Production Capacity: 24 months. Protect from frost
• Packaging Details: 5, 10 and 25 kg drums and 12x1 kg boxes.

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds.
TECHNICAL DATA:
Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry inerts.
Workability time: 40÷60 minutes.
Set to light foot traffic: after 12 hours.
Waiting time before laying: 24 hours for ceramic tiles, 2 days for natural stone and 4 days for resilient and wood coverings.
Residual humidity after 4 days: less than 2%.

Additional Information:

• Item Code: 24620
• Production Capacity: 12 months.
• Packaging Details: 20 kg bags.

• BULK READY - Generous 25 kg packaging for large-scale projects without constant refills
• BUILT TO LAST - Fibre reinforcement boosts durability and crack resistance
• TRUSTED BRAND - From MAPEI, a global leader in construction solutions
• VERSATILE USE - Ideal for structural repairs, anchoring, and grouting with professional-grade performance
• EFFORTLESS PRECISION - Thixotropic formula ensures smooth, drip-free application every time

MAPEI MAPEGROUT T80 is a 25 kg fibre-reinforced, thixotropic mortar designed for superior strength and easy application, perfect for professional-grade structural repairs and grouting.

Additional Information:

• Item Code: 1347525
• Production Capacity: 24 Months
• Packaging Details: 25 kg fibre-reinforced, thixotropic mortar designed for superior strength and easy application, perfect for professional-grade structural repairs and grouting.

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.
TECHNICAL DATA:
Maximum dimension of aggregate: 2.5 mm.
Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts of water and 0.25% of MAPECURE SRA.
Pot life of mix: approximately 1 hour (at +20°C).
Minimum applicable thickness: 1 cm.
Maximum applicable thickness: 4 cm per layer on vertical surfaces and 2 cm per layer on ceilings.
Classification: EN 1504-3 - class R4 structural mortar.

Additional Information:

• Item Code: 1347725
• Production Capacity: 12 months.
• Packaging Details: Application: gauging trowel, trowel or rendering machine. Consumption: 18.5 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.

The surface to be treated must be sound, clean, perfectly flat (no peaks or hollows) and with no cracks. Remove cement laitance, loose and crumbling parts and traces of dust, grease, oil and form-release compounds by sandblasting or with high pressure water jets. If water keeps leaking through onto concrete structures, block the leaks beforehand with Lamposilex. Cementitious render must be well cured (7 days for each cm of mortar applied in good weather), well bonded to the substrate, strong and free of dust and all kinds of paint. Integrate any missing areas or repair honeycombs with a suitable product from the Mapegrout range. Round off all sharp edges on horizontal and vertical surfaces and form fillets with the same Mapegrout range product. When applied on balconies and exposed horizontal surfaces, take extra care around joints between horizontal and vertical surfaces by applying 20 cm wide Mapetex 50 non-woven polypropylene tape, embedded in the two coats of Planiseal 288 Plus. Apply Mapeband TPE tape to the substrate around structural joints to form flexible waterproof seals; bond the tape in place with Adesilex PG4 epoxy adhesive. Absorbent surfaces to be treated with Planiseal 288 Plus must be wetted slightly with water prior to application

Additional Information:

• Item Code: 782725
• Production Capacity: )Storage: 24 months in original sealed packaging
• Packaging Details: Size: 5 Kg, Liquid

Code-113,114,136,138,700
(1 set=6*3kg)

In 3 kg and 1.5 kg packs, for small works

• Easy to apply
• Non-absorbent and easy to clean
• Certified anti-bacterial and mould-resistant
• Complies with HACCP food safety management procedures
• Helps keep the interiors more healthy
• Wide range of colours
• For joints up to 15 mm wide

High performance two-component polyurethane adhesives for ceramic tiles and stone material.
Keralastic is an improved reaction resin adhesive (R2). Interior and exterior floor and wall bonding of ceramic tiles, natural stone and agglomerates, mosaic on all types of substrates normally used in building. Particularly suitable for metal, wood, fibre-cement, rubber, PVC and linoleum surfaces. Absolutely necessary for bonding natural stone and agglomerates (all types of marbles, Verde Alpi, slate,…) also subject to movement and size variation due to the absorption of water (class C of dimentional stability according to Mapei standards). Applied in a continuous layer, they create a perfect waterproof surface on which ceramic tiles can be applied with the same product. Suitable for surfaces subject to accidental contact with water (for example wooden kitchen work surfaces). Keralastic T (R2T) is the thixotropic version of Keralastic and is particularly suitable for vertical applications. Technical data: Open time: 50 minutes. Grouting: 12 hours. Set to light foot traffic: approx. 12 hours. Deformability: highly deformable.

Additional Information:

• Packaging Details: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12 hours. Ready for use: 2 days. Colours: grey and white. Application: suitable notched trowel. Consumption: 1.5 kg/m² per mm of thickness.

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.
TECHNICAL DATA:
Maximum dimension of aggregate: 1 mm.
Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5 parts of water.
Pot life of mix: approximately 1 hour (at +20°C).
Minimum applicable thickness: 5 mm.
Maximum applicable thickness: 3.5 cm per layer.
Classification: EN 1504-3 - class R3 structural mortar.

Additional Information:

• Item Code: 1377120
• Production Capacity: 12 months
• Packaging Details: Application: trowel, gauging trowel or rendering machine, including the continuous-mixing type. Consumption: 17 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC).
TECHNICAL DATA:
Consistency: liquid.
Colour: blue.
Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate.
Drying time: 2 hours according to the dilution rate and the absorption of the substrate.
Application: brush.
EMICODE: EC1 - very low emission.
Consumption: 0.1-0.2 kg/m² according to use.

Anchored for sure! The structural anchor for every type of material.

Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars and C1 seismic loads.

ADVANTAGES:

• For structural anchors
• Including in seismic-risk zones
• For every type of material
• Rapid-hardening

TECHNICAL DATA:
Suitable substrates: all solid and perforated substrates such as concrete and concrete derivates, brickwork, mixed masonry, wood and rock.
Recommended penetration technique: drill, hammer drill.
Condition of hole for application: clean, dry, damp, wet or immersed underwater.
Workability time at +20°C: 6 mins.
Final hardening time at +20°C: 45 mins (dry substrate), 90 mins (wet substrate).
Certified bar diameter: from M8 to M30; from Ø8 to Ø32.
Certification: CE marking; ETA option 1 (anchors in tension and compressed zones); ETA option 7 (fasteners in compressive side); ETA Seismic performance C1; ETA option REBAR; fire resistance.

Additional Information:

• Item Code: 1960042IT
• Production Capacity: extrusion gun.
• Packaging Details: Packaging: 300 ml, 420 ml. Storage: 12 months (300 ml) or 18 months (420 ml) at +5°C - +25°C.

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using an extrusion pistol.
TECHNICAL DATA:
Consistency: thixotropic paste.
Solubility: non-soluble in water.
Dry solids content: 90%.
Storage: 12 months.
Application temperature range: from +5°C to +40°C.
Volumetric expansion in water: minimum 100%.
Formation of skin: 180-200 min.
Polymerisation time: 2 mm every 9 hours.
Consumption: approximately 320 ml every 3 metres.
Shore A hardness (DIN 53505): 32.
Elongation (DIN 53504): > 700%.
Ultimate strength (DIN 53504): 2.5 N/mm².
Modulus of elasticity at 100% elongation (DIN 53504): 0.55 N/mm².
Tear strength (ISO 34-1): 10 N/mm.
Water-tightness: 1 atm.

Additional Information:

• Item Code: 2821191
• Production Capacity: 12 months
• Packaging Details: Application temperature range: from +5°C to +40°C. Volumetric expansion in water: minimum 100%. Formation of skin: 180-200 min. Polymerisation time: 2 mm every 9 hours. Consumption: approximately 320 ml every 3 metres. Shore A hardness (DIN 53505): 32. Elongation (DIN 53504): > 700%. Ultimate strength (DIN 53504): 2.5 N/mm². Modulus of elasticity at 100% elongation (DIN 53504): 0.55 N/mm². Tear strength (ISO 34-1): 10 N/mm. Water-tightness: 1 atm. Packaging: boxes containing 6 320 ml cartridges.