Yashas Enterprises
Chennai, Tamil Nadu
GST No. 33AOBPR5564H1ZU
Call 08048616422 93% Response Rate
Send Enquiry
Tile Adhesives
Keracolor SF Boxes 0.5 kg/1 kg
Minimum Order Quantity: 1 Bag
| Packaging Size | 1 kg |
| Packaging Type | Bag |
| Strength | High |
| Chemical Resistance | Water |
| Country of Origin | Made in India |
code-112,113,144,120,100,114,130,132,
10*1kg in box
100,112,113,114,120,144,
Fine-grained mortar for smooth and glossy surfaces
Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide.
ADVANTAGES:
- Fine-grained
- Easy workability
- Durable and strong
- Easy to clean
- Uniform grouts, without cracks
- Good resistance to acids
Additional Information:
- Production Capacity: 12 months (20 kg bag), 24 months (2 kg and 5 kg Alupak bags)
- Packaging Details: 12 months (20 kg bag), 24 months (2 kg and 5 kg Alupak bags) Consumption: depends on the width of the joint, the size and thickness of the tiles. Packaging: 2 kg, 5 kg and 20 kg bags
View Complete details
MAPEI ISOLASTIC PRIMER
Product Brochure
| Packaging Size | 8 KG |
| Grey and white | WHITE |
Pot life: Over 8 hours.
Open Time: 20 minutes.
Grouting:
– walls: 4-8 hours.
– floors: 24-36 hours.
Set to light foot traffic: approx. 24-36 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12002:
S2 – highly deformable
S1- deformable
Colours: White
Application: Kerabond T Isolastic notched trowel n. 4 or 5 or 6.
EMICODE: EC1 R Plus – very low emission.
Storage: 24 months. Protect from frost.
Consumption: 8kg Isolastic + 25kg Kerabond T
Packaging: 8 kg.
View Complete details
Mapei Kerabond Tile Adhesive
| Packaging Size | 25 kg |
| Grey and white | Yes |
Cement-based powder with superior bond strength suitable for all types of tiles and natural stones.
Advantages:
- Interior and exterior floor and wall installations
- Very low VOC content
- Easily trowellable
- Good bond strength
- Low slump
- High initial grab
- Hardens without noticeable shrinkage
View Complete details
Mapei Adesilex P9 Tile Adhesive
| Packaging Size | 25 kg |
| Grey and white | Grey |
Pot life of mix: over 8 hours.
Open time: 30 minutes.
Waiting time before grouting:
– on walls: 4-8 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
View Complete details
Mapei Keraflex Maxi S1 Adhesives
| Packaging Size | 25 kg |
| Grey and white | YES |
Special high performance, deformable, non-slip grey and white adhesive with extended open time, Low Dust technology, very low emission of volatile organic compounds and with offset Greenhouse Gas emissions for bonding ceramic tiles and large stone slabs
- Zero drop in high thickness
- Excellent workability
- Deformable
- Ideal for installing large formats
- High bond strength
- High thixotropy
- Less dust given off while mixing
- Certified for use in the marine industry
- Very low emission of VOC
- Residual Greenhouse Gas emissions fully offset through the acquisition of certified environmental credits
View Complete details
Mapei Adesilex P10 Tile Adhesive
| Packaging Size | 25 kg |
| Grey and white | WHITE |
View Complete details
Mapei Keraflex Tile Adhesive
| Packaging Size | 25 kg |
| Grey and white | GREY |
High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.
BENEFIT:
- Excellent workability
- Perfect adhesion to all materials
- Low emission level of VOC
- Extended open time
TECHNICAL DATA:
Pot life of mix: more than 8 hours.
Open time: 30 minutes.
Waiting time before grouting:
– on walls: 4-6 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
View Complete details
KERASET GREY 25KG BAG
View Complete details
Myk Laticrete 190 Sealer
Product Brochure
| Packaging Size | 1 liter |
| Country of Origin | Made in India |
LATICRETE® 190 Sealer is a penetrating sealer that forms a water-repellent coating on marble, brick, limestone and mortar joints.
| Features | Waterproof |
| Brand | Myk Laticrete |
| Adjustment Time | 60 minutes |
Uses
• Interior and exterior sealer to protect installations
• Seals mortar and plaster
• Reduces the effect of efflorescence
• Can be used as a grout release by treating ceramic tile before the application of grout
• Repels water and rain
Advantages:
• Weather resistance protects stone, brick and tile
• Easy to apply no special tools required
• Water- based, non-flammable
Surface Preparation:
The surface to be sealed must be clean and dry. Surface temperature should be between 45°-85°F (7-30° C). Allow cements, stucco and mortars to cure 24 hours before applying sealer. Test on a small unobtrusive area before coating entire surface.
Application
Apply the sealer with a sponge, brush or sprayer. Allow to penetrate 5 to 10 minutes.
Wipe Off excess sealers. Allow LATICRETE® 190 Sealer to cure for 24 hours.
One application is sufficient for most installations.
NOTE: Excess material should be wiped from the surface of marble, granite, glazed tile or rock when applied on horizontal surfaces. A white residue may occur if excess material is allowed to dry on a polised surface.
Cleaning – LATICRETE® 190 Sealer cleans easily with fresh water immediately after use. Do not allow dried residue remain on polished surface, glass or aluminum.
Coverage
Approximately 75 sq. ft. per ltr
Packing size: 1 ltr, 5 ltr & 20 ltr
View Complete details
Floor Tile Adhesive
| Type | Type 1 |
| Packaging Size | 20 kg |
| Color | Grey |
| Base Type | Cementitious |
| Application Area | Interior |
| Tile Type | Ceramic Tiles |
| Features | Waterproof |
- Best for: Standard ceramic or porous terracotta tiles on concrete floors in dry, interior areas.
- Key features: Mixed with water, these provide a strong bond and are more cost-effective than other options.
- Limitations: They lack flexibility, which can lead to cracking in areas with structural movement or significant temperature changes.
- Product example: Roff New Construction Adhesive (NCA), a grey cement-based adhesive suitable for new floor tiles
View Complete details
Floor Tile Adhesive
- Best for: Standard ceramic or porous terracotta tiles on concrete floors in dry, interior areas.
- Key features: Mixed with water, these provide a strong bond and are more cost-effective than other options.
- Limitations: They lack flexibility, which can lead to cracking in areas with structural movement or significant temperature changes.
- Product example: Roff New Construction Adhesive (NCA), a grey cement-based adhesive suitable for new floor tiles
View Complete details
EXPLORE MORE CATEGORIES